Dice: generating "Zocchi results" using "normal" polyhedrons

If it doesn't fit into a category above, then inscribe it here, O Mighty One...

Moderators: DJ LaBoss, finarvyn, michaelcurtis, Harley Stroh

goodmangames
Cold-Hearted Immortal
Posts: 2703
Joined: Sun Dec 01, 2002 12:41 pm
Location: San Jose, CA

Dice: generating "Zocchi results" using "normal" polyhedrons

Post by goodmangames »

Several people have asked this, so here is my simple summary of how to achieve "Zocchi results" with "normal" polyhedrons. (Funny that the d4 is now "normal" -- it sure seemed weird when I was a kid!) In other words, this is how to simulate a d3, d5, d7, etc. with your normal dice.

What's a control die? Several of the examples below require a "control die." A control die means you roll 1d6 along with the first die, and the 1d6 result indicates whether you add to the first die. For example, to simulate 1d24, you can roll 1d12 with a control die. If the control die is even, take the 1d12 result "straight"; if the control die is odd, take the 1d12 result and add 12.

How to simulate Zocchi dice results:
d3: Roll 1d6 and divide by 2.
d5: Roll 1d10 and divide by 2.
d7: (Option A) Roll 1d8 and re-roll on an 8. (Option B) Roll 1d14 and divide by 2 (if you have a d14, which you probably don't if you're reading this, but just in case...)
d14: Roll 1d20 and re-roll on 16-20.
d16: (Option A) Roll 1d8 with a control die (add +0 or +8 depending on the control die). (Option B) Roll 1d20 and re-roll on 17-20.
d24: (Option A) Roll 1d12 with a control die (add +0 or +12 depending on the control die). (Option B) Roll 1d30 and re-roll on 25-30.
d30: Roll 1d10 with a 6-sided control die (add +0 on 1-2, +10 on 3-4, or +20 on 5-6).

Note: There are multiple ways to achieve the Zocchi dice results. The ones noted above are just the simplest ones I've personally come across. If you have an even better preferred method, let us know by posting here!
Joseph Goodman
Goodman Games
www.goodman-games.com
User avatar
GnomeBoy
Tyrant Master (Administrator)
Posts: 4126
Joined: Fri Mar 10, 2006 1:46 pm
FLGS: Bizarro World
Location: Left Coast, USA
Contact:

Re: Dice: generating "Zocchi results" using "normal" polyhed

Post by GnomeBoy »

Good idea for a thread, but
goodmangames wrote:d30: Roll 1d20 with a 6-sided control die (add +0 on 3-4, or +10 on 5-6).
whothewhatnow? :?: What do you do with a control result of 1-2?

I'd use d30: Roll 1d10 with a control die (1-2 add zero, 3-4 add 10, 5-6 add 20).

For what it's worth, I make the control high/low to match the end result high/low (rather than even/odd = high/low).
...
Gnome Boy • DCC playtester @ DDC 35 Feb '11. • Beta DL 2111, 7AM PT, 8 June 11.
Playing RPGs since '77 • Quasi-occasional member of the Legion of 8th-Level Fighters.

Link: Here Be 100+ DCC Monsters

bygrinstow.com - The Home of Inner Ham
jmucchiello
Chaos-Summoning Sorcerer
Posts: 779
Joined: Mon Mar 14, 2011 3:28 am

Re: Dice: generating "Zocchi results" using "normal" polyhed

Post by jmucchiello »

This is my edit, fixing d30 and adding "options" to the control die explanation.
goodmangames wrote:Several people have asked this, so here is my simple summary of how to achieve "Zocchi results" with "normal" polyhedrons. (Funny that the d4 is now "normal" -- it sure seemed weird when I was a kid!) In other words, this is how to simulate a d3, d5, d7, etc. with your normal dice.

What's a control die? Several of the examples below require a "control die." If you have ever rolled a d100 using two 10-sided dice, you have already mastered the use of the control die. A control die means you roll a second die (usually a 1d6) along with the first die, and the 1d6 result indicates whether you add to the first die. For example, to simulate 1d24, you can roll 1d12 with a control die. (OPTION A) If the control die is even, take the 1d12 result "straight"; if the control die is odd, take the 1d12 result and add 12. (OPTION B) If the control die is low (1, 2, or 3), take the 1d12 result "straight"; if the control die is high (4, 5, or 6), take the 1d12 result and add 12. Choose between OPTION A and OPTION B at the beginning of the evening and stick with that choice so everyone looking at your die rolls gets the same result. I prefer OPTION B because sometimes there are more than two results needed on the control die (see d30 below).

How to simulate Zocchi dice results:
d3: Roll 1d6 and divide by 2.
d5: Roll 1d10 and divide by 2.
d7: (Option A) Roll 1d8 and re-roll on an 8. (Option B) Roll 1d14 and divide by 2 (if you have a d14, which you probably don't if you're reading this, but just in case...)
d14: (Option A) Roll 1d20 and re-roll on 16-20. (Option B) Roll a d8 and re-roll on an 8 plus a control die (add +0 or +7 depending n the control die) Roll the control die after knowing the d8 did not roll an 8.
d16: (Option A) Roll 1d8 with a control die (add +0 or +8 depending on the control die). (Option B) Roll 1d20 and re-roll on 17-20.
d24: (Option A) Roll 1d12 with a control die (add +0 or +12 depending on the control die). (Option B) Roll 1d30 and re-roll on 25-30.
d30: Roll 1d10 with a 6-sided control die (add +0 on 1-2, +10 on 3-4, or +20 on 5-6).
User avatar
finarvyn
Cold-Hearted Immortal
Posts: 2599
Joined: Fri Jun 26, 2009 3:42 am
FLGS: Fair Game, Downers Grove IL
Location: Chicago suburbs
Contact:

Re: Dice: generating "Zocchi results" using "normal" polyhed

Post by finarvyn »

GnomeBoy wrote:
goodmangames wrote:d30: Roll 1d20 with a 6-sided control die (add +0 on 3-4, or +10 on 5-6).
whothewhatnow? :?: What do you do with a control result of 1-2? I'd use d30: Roll 1d10 with a control die (1-2 add zero, 3-4 add 10, 5-6 add 20).
I've always done it as you suggested with the d10.
Marv / Finarvyn
DCC Minister of Propaganda; Deputized 6/8/11 (over 11 years of SPAM bustin'!)
DCC RPG playtester 2011, DCC Lankhmar trivia contest winner 2015; OD&D player since 1975

"The worthy GM never purposely kills players' PCs, He presents opportunities for the rash and unthinking players to do that all on their own."
-- Gary Gygax
"Don't ask me what you need to hit. Just roll the die and I will let you know!"
-- Dave Arneson
"Misinterpreting the rules is a shared memory for many of us"
-- Joseph Goodman
jmucchiello
Chaos-Summoning Sorcerer
Posts: 779
Joined: Mon Mar 14, 2011 3:28 am

Re: Dice: generating "Zocchi results" using "normal" polyhed

Post by jmucchiello »

finarvyn wrote:I think it was supposed to be +0 on a 1-4, or +10 on a 5-6
I hope not, that would be non-linear.

d20+0 on 1-4 and d20/2+20 on 5-6 works, but has high potential for confusion.
Harley Stroh
Cold-Hearted Immortal
Posts: 1805
Joined: Wed Sep 15, 2004 4:02 am
Location: On the run.
Contact:

Re: Dice: generating "Zocchi results" using "normal" polyhed

Post by Harley Stroh »

Traveller over on the Acaeum offered up these formulas:
Traveller wrote: d3 = 1d6/2. round up
d5 = 1d20/4, round up or 1d10/2, round up (thanks to Sardan for the d10 version)
d7 = 2d4-1
d14 = (1d8+2d4)-2 or (2d6+1d4)-2
d16 = 3d6-2
d24 = (1d10+2d8)-2 or (2d10+1d6)-2
d30 = (1d20+2d6)-2, (1d12+2d10)-2, or (2d12+1d8)-2
//H
The lucky guy who got to write some Dungeon Crawl Classics.

DCC Resource thread: character sheets, judge tools, and the world's fastest 0-level party creator.
jmucchiello
Chaos-Summoning Sorcerer
Posts: 779
Joined: Mon Mar 14, 2011 3:28 am

Re: Dice: generating "Zocchi results" using "normal" polyhed

Post by jmucchiello »

Harley Stroh wrote:Traveller over on the Acaeum offered up these formulas:
Traveller wrote: d3 = 1d6/2. round up
d5 = 1d20/4, round up or 1d10/2, round up (thanks to Sardan for the d10 version)
d7 = 2d4-1
d14 = (1d8+2d4)-2 or (2d6+1d4)-2
d16 = 3d6-2
d24 = (1d10+2d8)-2 or (2d10+1d6)-2
d30 = (1d20+2d6)-2, (1d12+2d10)-2, or (2d12+1d8)-2
//H
And most of the are non-linear. What good are non-linear equations for simulating Zocchie dice?
meinvt
Deft-Handed Cutpurse
Posts: 261
Joined: Thu Jun 09, 2011 5:05 pm
Location: Central Vermont

Re: Dice: generating "Zocchi results" using "normal" polyhed

Post by meinvt »

jmucchiello wrote:
Harley Stroh wrote:Traveller over on the Acaeum offered up these formulas:
Traveller wrote: d3 = 1d6/2. round up
d5 = 1d20/4, round up or 1d10/2, round up (thanks to Sardan for the d10 version)
d7 = 2d4-1
d14 = (1d8+2d4)-2 or (2d6+1d4)-2
d16 = 3d6-2
d24 = (1d10+2d8)-2 or (2d10+1d6)-2
d30 = (1d20+2d6)-2, (1d12+2d10)-2, or (2d12+1d8)-2
//H
And most of the are non-linear. What good are non-linear equations for simulating Zocchie dice?
Agreed! This only adds to the confusion unless you are telling folks what not to do.
User avatar
GnomeBoy
Tyrant Master (Administrator)
Posts: 4126
Joined: Fri Mar 10, 2006 1:46 pm
FLGS: Bizarro World
Location: Left Coast, USA
Contact:

Re: Dice: generating "Zocchi results" using "normal" polyhed

Post by GnomeBoy »

Reboot?
...
Gnome Boy • DCC playtester @ DDC 35 Feb '11. • Beta DL 2111, 7AM PT, 8 June 11.
Playing RPGs since '77 • Quasi-occasional member of the Legion of 8th-Level Fighters.

Link: Here Be 100+ DCC Monsters

bygrinstow.com - The Home of Inner Ham
birthright
Ill-Fated Peasant
Posts: 8
Joined: Thu Jun 09, 2011 1:44 am

Re: Dice: generating "Zocchi results" using "normal" polyhed

Post by birthright »

Buy a set of BLANK polyhedral dice (i.e. a set of blank d4, d6, d8, d10, d12, d20) then:

For:
d3 use the blank d6 and label it: 1,2,3,1,2,3
d5 use the blank d10 and label it: 1,2,3,4,5,1,2,3,4,5
d7 use the blank d8 and label it: 1,2,3,4,5,6,7,R (R means re-roll the die)
d14/d16 use the blank d20 and label it: 1,2,3,4,5,6,7,8,9,10,11,12,13,14,R/15,R/16,R,R,R,R (when rolling for d14 treat the R/15 and R/16 faces as re-rolls)
d24 use the blank d4 and label it: 0,0,12,12 then throw it alongside a standard d12 and add the two results
d30 use the blank d12 and label it: 0,0,0,0,10,10,10,10,20,20,20,20 then throw it alongside a standard d10 and add the two results (treat 0+0 as 30 of course!)

There. Zochii dice simulated for under $3. You just need to re-roll occasionally - the worst offender being the d14 where you'll need to re-roll 6 of 20 rolls (30% of the time).
Machpants
Deft-Handed Cutpurse
Posts: 247
Joined: Sun Jan 16, 2011 6:56 pm
Location: NZ

Re: Dice: generating "Zocchi results" using "normal" polyhed

Post by Machpants »

Hehe I was going to quote you from RPGNet here, but ... you beat me too it :D
LAST OF THE F3W
Gloria Finis
birthright
Ill-Fated Peasant
Posts: 8
Joined: Thu Jun 09, 2011 1:44 am

Re: Dice: generating "Zocchi results" using "normal" polyhed

Post by birthright »

Machpants wrote:Hehe I was going to quote you from RPGNet here, but ... you beat me too it :D
Heh. Yeah, I thought the idea might get more oxygen here.
jmucchiello
Chaos-Summoning Sorcerer
Posts: 779
Joined: Mon Mar 14, 2011 3:28 am

Re: Dice: generating "Zocchi results" using "normal" polyhed

Post by jmucchiello »

birthright wrote:Buy a set of BLANK polyhedral dice (i.e. a set of blank d4, d6, d8, d10, d12, d20) then:

For:
d3 use the blank d6 and label it: 1,2,3,1,2,3
d5 use the blank d10 and label it: 1,2,3,4,5,1,2,3,4,5
d7 use the blank d8 and label it: 1,2,3,4,5,6,7,R (R means re-roll the die)
d14/d16 use the blank d20 and label it: 1,2,3,4,5,6,7,8,9,10,11,12,13,14,R/15,R/16,R,R,R,R (when rolling for d14 treat the R/15 and R/16 faces as re-rolls)
d24 use the blank d4 and label it: 0,0,12,12 then throw it alongside a standard d12 and add the two results
d30 use the blank d12 and label it: 0,0,0,0,10,10,10,10,20,20,20,20 then throw it alongside a standard d10 and add the two results (treat 0+0 as 30 of course!)

There. Zochii dice simulated for under $3. You just need to re-roll occasionally - the worst offender being the d14 where you'll need to re-roll 6 of 20 rolls (30% of the time).
+d9 :)
Although writing R/15 onto the surface of d20 requires impeccable handwriting that I would lack.
smathis
Cold-Hearted Immortal
Posts: 1095
Joined: Fri Jan 28, 2011 12:52 pm
Location: Richmond, VA
Contact:

Re: Dice: generating "Zocchi results" using "normal" polyhed

Post by smathis »

jmucchiello wrote: +d9 :)
Although writing R/15 onto the surface of d20 requires impeccable handwriting that I would lack.
You could leave all the "R" sides blank and then reroll if you get a blank...

The only problem I see with the blank dice thing is determining which one is a d7 and which one is a d8. Other than that, it's awesome.
jmucchiello
Chaos-Summoning Sorcerer
Posts: 779
Joined: Mon Mar 14, 2011 3:28 am

Re: Dice: generating "Zocchi results" using "normal" polyhed

Post by jmucchiello »

smathis wrote:The only problem I see with the blank dice thing is determining which one is a d7 and which one is a d8. Other than that, it's awesome.
Buy the blank set in a color you don't already own, most likely flat white.
User avatar
Hamel™
Wild-Eyed Zealot
Posts: 56
Joined: Wed Feb 09, 2011 12:09 pm
Location: Italy

Re: Dice: generating "Zocchi results" using "normal" polyhed

Post by Hamel™ »

To generate a d7 you can always use 7 cards from a Poker Deck, shuffling them each time.
Last edited by Hamel™ on Thu Jun 16, 2011 2:09 am, edited 1 time in total.
rabindranath72
Hard-Bitten Adventurer
Posts: 112
Joined: Wed Sep 06, 2006 4:21 am

Re: Dice: generating "Zocchi results" using "normal" polyhed

Post by rabindranath72 »

jmucchiello wrote:
Harley Stroh wrote:Traveller over on the Acaeum offered up these formulas:
Traveller wrote: d3 = 1d6/2. round up
d5 = 1d20/4, round up or 1d10/2, round up (thanks to Sardan for the d10 version)
d7 = 2d4-1
d14 = (1d8+2d4)-2 or (2d6+1d4)-2
d16 = 3d6-2
d24 = (1d10+2d8)-2 or (2d10+1d6)-2
d30 = (1d20+2d6)-2, (1d12+2d10)-2, or (2d12+1d8)-2
//H
And most of the are non-linear. What good are non-linear equations for simulating Zocchie dice?
Apparently he created these rules to generate ranges from table, which are distribution-agnostic; but he used the notation for uniform distributions. So yes, one way or the other, he is wrong.
dkadera
Gongfarmer
Posts: 1
Joined: Mon May 19, 2008 9:18 am
Location: Port Charlotte, FL
Contact:

Re: Dice: generating "Zocchi results" using "normal" polyhed

Post by dkadera »

Because more tables are always better :D ; not a perfect solution, there are still re-rolls, but it works.

http://dl.dropbox.com/u/10388550/Zocchi ... 0Table.xls
User avatar
finarvyn
Cold-Hearted Immortal
Posts: 2599
Joined: Fri Jun 26, 2009 3:42 am
FLGS: Fair Game, Downers Grove IL
Location: Chicago suburbs
Contact:

Re: Dice: generating "Zocchi results" using "normal" polyhed

Post by finarvyn »

Here's another interesting take on the dice situation.
If you've played Traveller, then you remember the d66, or rolling two six-sided dice reading the first result as 10's and the second as 1's. The d66 equals to a d36, in which on any other roll you have 36 possible combinations (6 times 6.) See the point? 16 is 4 times 4, thus a d44. 24 is 4 times 6 (or 6 times 4), thus a d46 or a d64. 30 is 6 times 5 (or 5 times 6), thus a d65 or a d56. You can also generates numbers between 1 and 30 by rolling 1d6 (or 1d3) and 1d10 reading 1-2 (1) as +0, 3-4 (2) as +10 and 5-6 (3) as +20.
A couple of tables follow. You can find the blog post here:
http://theyaqqothlgrimoire.blogspot.com ... -free.html
Marv / Finarvyn
DCC Minister of Propaganda; Deputized 6/8/11 (over 11 years of SPAM bustin'!)
DCC RPG playtester 2011, DCC Lankhmar trivia contest winner 2015; OD&D player since 1975

"The worthy GM never purposely kills players' PCs, He presents opportunities for the rash and unthinking players to do that all on their own."
-- Gary Gygax
"Don't ask me what you need to hit. Just roll the die and I will let you know!"
-- Dave Arneson
"Misinterpreting the rules is a shared memory for many of us"
-- Joseph Goodman
User avatar
wavemotion
Far-Sighted Wanderer
Posts: 34
Joined: Tue Jun 21, 2011 6:15 am
Contact:

Re: Dice: generating "Zocchi results" using "normal" polyhed

Post by wavemotion »

finarvyn wrote:Here's another interesting take on the dice situation.
If you've played Traveller, then you remember the d66, or rolling two six-sided dice reading the first result as 10's and the second as 1's. The d66 equals to a d36, in which on any other roll you have 36 possible combinations (6 times 6.) See the point? 16 is 4 times 4, thus a d44. 24 is 4 times 6 (or 6 times 4), thus a d46 or a d64. 30 is 6 times 5 (or 5 times 6), thus a d65 or a d56. You can also generates numbers between 1 and 30 by rolling 1d6 (or 1d3) and 1d10 reading 1-2 (1) as +0, 3-4 (2) as +10 and 5-6 (3) as +20.
A couple of tables follow. You can find the blog post here:
http://theyaqqothlgrimoire.blogspot.com ... -free.html
Random thoughts:

1. I'm not keen for the d44 nomenclature they used (I realize they are adapting the d66 from Traveller where it does make sense since a d6d6 is the same as d66 when the control die is a multiple of 10) - it's really a d4d4 (since d44 means something specific when you're talking about dice and die rollers... i.e. 44 equal probabilities... otherwise the table they showcase has a problem in that d44 and d16 are shown as table column headings and one means d4/d4 to produce 16 different outcomes and the other d16).

2. This is the same as the 'control die' method. The first die is the control die and determines if you add 0, 4, 8 or 12 ... or, for those astute readers: ((d4control - 1) * 4) + d4 yields the same as a d16. Thinking of it as a control die means you don't have to use a lookup table to get a result to use in potentially another look up table (too many indexes makes for less fun, IMO).

-Dave
User avatar
Dreamslinger
Far-Sighted Wanderer
Posts: 49
Joined: Wed Jun 08, 2011 12:25 pm
Location: San Diego, CA

Re: Dice: generating "Zocchi results" using "normal" polyhed

Post by Dreamslinger »

smathis wrote:
jmucchiello wrote: +d9 :)
Although writing R/15 onto the surface of d20 requires impeccable handwriting that I would lack.
You could leave all the "R" sides blank and then reroll if you get a blank...

The only problem I see with the blank dice thing is determining which one is a d7 and which one is a d8. Other than that, it's awesome.

Ink the highest result in a different color.
Magic: 40% of the time it works every time.
fred.thecimmerian
Gongfarmer
Posts: 1
Joined: Sat Jun 25, 2011 7:28 pm
Location: Maryville, TN

Re: Dice: generating "Zocchi results" using "normal" polyhed

Post by fred.thecimmerian »

Just got my 12-pc Dice Set from Game Science with my d-7 extra. I looked at the d-7 for a few minutes before I figured out how the read it other than the 6 or 7. ;)
"Let me tell you of the days of high adventure..."
DaveMage
Far-Sighted Wanderer
Posts: 16
Joined: Mon Apr 02, 2007 6:25 am
Location: Gainesville, FL

Re: Dice: generating "Zocchi results" using "normal" polyhed

Post by DaveMage »

I know this is likely sacreligious, but for those with an iPad/iPhone, there is an app that will let you do d[x]:

http://itunes.apple.com/us/app/rpg-calc ... 51276?mt=8

(Though I still prefer rolling dice. :) )
sirhotalot
Gongfarmer
Posts: 2
Joined: Thu Jun 30, 2011 2:40 pm

Re: Dice: generating "Zocchi results" using "normal" polyhed

Post by sirhotalot »

Have any of you been doing the math to compare the results of the actual die? You have to keep in mind the the die roll differently because of their shapes and therefor wont produce the same average.

You can calculate them here: http://www.wolframalpha.com/

These die produce a +1 on average compared to what the actual die would get (whereas a D30 might produce an average 14 a d20+d10 produces an average of 15).

The closest I could get was for a D30 roll 1d10 and 1d20 and add the results together.

For a d24 roll 2d12.

For a d16 roll 2d8.
User avatar
finarvyn
Cold-Hearted Immortal
Posts: 2599
Joined: Fri Jun 26, 2009 3:42 am
FLGS: Fair Game, Downers Grove IL
Location: Chicago suburbs
Contact:

Re: Dice: generating "Zocchi results" using "normal" polyhed

Post by finarvyn »

sirhotalot wrote:The closest I could get was for a D30 roll 1d10 and 1d20 and add the results together.

For a d24 roll 2d12.

For a d16 roll 2d8.
Sorry, but these are just wrong.
1. They produce a "bell" shape instead of a linear one. (This means that there is a higher chance of getting numbers in the middle than on the extremes.)
2. They don't produce the right range. For example, 2d12 produces numbers from 2-24, not 1-24.

See earlier parts of this thread for correct options, such as the use of the control die.
Marv / Finarvyn
DCC Minister of Propaganda; Deputized 6/8/11 (over 11 years of SPAM bustin'!)
DCC RPG playtester 2011, DCC Lankhmar trivia contest winner 2015; OD&D player since 1975

"The worthy GM never purposely kills players' PCs, He presents opportunities for the rash and unthinking players to do that all on their own."
-- Gary Gygax
"Don't ask me what you need to hit. Just roll the die and I will let you know!"
-- Dave Arneson
"Misinterpreting the rules is a shared memory for many of us"
-- Joseph Goodman
Post Reply

Return to “DCC RPG General”