Maps for DCC #27 - Revenge of the Rat King
Moderators: DJ LaBoss, finarvyn, Harley Stroh
-
- Far-Sighted Wanderer
- Posts: 10
- Joined: Mon Feb 11, 2008 7:49 am
- Location: United Kingdom
- Contact:
Maps for DCC #27 - Revenge of the Rat King
Hi folks
Updated the map.....see below
Updated the map.....see below
Last edited by cisticola on Sat Mar 08, 2008 1:09 pm, edited 3 times in total.
-
- Far-Sighted Wanderer
- Posts: 10
- Joined: Mon Feb 11, 2008 7:49 am
- Location: United Kingdom
- Contact:
Hi folks
Finished the first level......quite a challenge......
Hi-res version is here at the moment:
http://www.danielrivera.org/gallery/dis ... fullsize=1
Finished the first level......quite a challenge......
Hi-res version is here at the moment:
http://www.danielrivera.org/gallery/dis ... fullsize=1
-
- Wild-Eyed Zealot
- Posts: 78
- Joined: Sun Oct 14, 2007 1:18 pm
-
- Far-Sighted Wanderer
- Posts: 10
- Joined: Mon Feb 11, 2008 7:49 am
- Location: United Kingdom
- Contact:
This version would be hard to print I am afraid.....these type of maps are good for virtual tabletop playing (i.e. something like Battlegrounds)....frank5471uk wrote:Cisticola
The hi-res version looks beautiful. Well done.
What's the best way to print this baby ?
Frank
But never fear.....I will make a version that has no shading and a white background if you require.......otherwise it is alot of ink to print.
If you are printing this do you need a grid to be on the map.....I can put one on at 1 square = 5ft
Actually yes, please do. I'd definitely like to print these out. I usually print them out on an e-sized plotter, but others print them out a page at at time until they have the whole map.cisticola wrote: But never fear.....I will make a version that has no shading and a white background if you require.......otherwise it is alot of ink to print.
If you are printing this do you need a grid to be on the map.....I can put one on at 1 square = 5ft
Dark Oracle of Gaming
-
- Wild-Eyed Zealot
- Posts: 78
- Joined: Sun Oct 14, 2007 1:18 pm
Is this something that requires a projector mounted on the ceiling projecting vertically down onto the table ?cisticola wrote:This version would be hard to print I am afraid.....these type of maps are good for virtual tabletop playing (i.e. something like Battlegrounds)....frank5471uk wrote:Cisticola
The hi-res version looks beautiful. Well done.
What's the best way to print this baby ?
Frank
But never fear.....I will make a version that has no shading and a white background if you require.......otherwise it is alot of ink to print.
If you are printing this do you need a grid to be on the map.....I can put one on at 1 square = 5ft
I can't see the better half agreeing to that mod for our dining room
I usually DM at both extremes of the terrain spectrum (i.e. either gridded battlemap and erasable markers OR full 3D terrain using either/both Dwarven Forge and/or WorldWorks Games cardstock models - nothing between).
This map seemed a nice "in-between" option if it could be printed economically.
Finally, yes, gridlines would be very useful.
Thanks anyway, it's still a very nice piece of work.
Frank
There are 10 types of people in the world. Those that understand binary and those that don't.
-
- Far-Sighted Wanderer
- Posts: 10
- Joined: Mon Feb 11, 2008 7:49 am
- Location: United Kingdom
- Contact:
Yes that is another option...although I just play on screen.....may seem odd to some.....but the beauty of roleplaying is its your imagination that drives the game....suppose that is why when i first started a few counters representing the PCs and monsters was all I needed....Frank
Is this something that requires a projector mounted on the ceiling projecting vertically down onto the table ?
I can't see the better half agreeing to that mod for our dining room
I usually DM at both extremes of the terrain spectrum (i.e. either gridded battlemap and erasable markers OR full 3D terrain using either/both Dwarven Forge and/or WorldWorks Games cardstock models - nothing between).
This map seemed a nice "in-between" option if it could be printed economically.
Finally, yes, gridlines would be very useful.
Thanks anyway, it's still a very nice piece of work.
Frank
another option would be to keep the map with the shading but remove the dark background....which would keep my nice map in one piece but reduce the amount of ink required to print.
But before I go and do anything, I will see what Ben has to say because I have not done maps for printing before.........
Ben says:
1. Check in on the Dundjinni forums. There are a few theads talking about printing of maps relatively cheaply. Some people sell their services and will print out Large maps on plotters. I've also seen people, myself included, print out the maps on regular 8x11 paper and tape them together.
2. There are services online that will do large scale printing. Don't recall any off the top of my head but they are out there.
BenWax
1. Check in on the Dundjinni forums. There are a few theads talking about printing of maps relatively cheaply. Some people sell their services and will print out Large maps on plotters. I've also seen people, myself included, print out the maps on regular 8x11 paper and tape them together.
2. There are services online that will do large scale printing. Don't recall any off the top of my head but they are out there.
BenWax
"They Might Be Dwarves" - World Champions Xcrawl 2007. So BAD...but yet so good.
-
- Cold-Blooded Diabolist
- Posts: 419
- Joined: Tue Aug 22, 2006 6:50 pm
- Location: Elfrida, Arizona
frank5471uk wrote:Is this something that requires a projector mounted on the ceiling projecting vertically down onto the table ?cisticola wrote:This version would be hard to print I am afraid.....these type of maps are good for virtual tabletop playing (i.e. something like Battlegrounds)....frank5471uk wrote:Cisticola
The hi-res version looks beautiful. Well done.
What's the best way to print this baby ?
Frank
But never fear.....I will make a version that has no shading and a white background if you require.......otherwise it is alot of ink to print.
If you are printing this do you need a grid to be on the map.....I can put one on at 1 square = 5ft
I can't see the better half agreeing to that mod for our dining room
I usually DM at both extremes of the terrain spectrum (i.e. either gridded battlemap and erasable markers OR full 3D terrain using either/both Dwarven Forge and/or WorldWorks Games cardstock models - nothing between).
This map seemed a nice "in-between" option if it could be printed economically.
Finally, yes, gridlines would be very useful.
Thanks anyway, it's still a very nice piece of work.
Frank
Frank, Frank, Frank... your approaching your better half all wrong. You need to convince her she needs it. How awesome would it be to project family pics like that? Sell her on her needing it, then enjoy the fringe benefits of just happening to be able to use it for your gaming needs.
Castles and Crusades is my game of choice!
- welland_warrior
- Wild-Eyed Zealot
- Posts: 57
- Joined: Wed Feb 06, 2008 5:12 pm
Re: Maps for DCC #27 - Revenge of the Rat King
Did this map ever get finished? I'm looking to run this adventure. Can someone give me an update? Thanks!
Re: Maps for DCC #27 - Revenge of the Rat King
Gotta say, I was not happy with the linar layout of the maps, how room x lead directly to room y. Had to change that. I used this as a side adventure for our 7th level thief. Instead of an absolute capture to end section 1it became a junction space where turning left entered section 2, right for section 3. I recall the Khalil turned right and cameinto 3 just before the owl bears.
Gotta say, really loved the art for the Rat Troll!
LG
Gotta say, really loved the art for the Rat Troll!
LG